PLUNGER SUSPENSION SPINDLE, OVERSIZE

WEAR ON THE SPINDLES CAN CAUSE VERY POOR HANDLING, MOST SPINDLES WHEN MEASURED SHOW LARGE DEVIATIONS FROM THE CORRECT SIZE DUE TO AGE AND OFTEN CORROSION.  THESE SPINDLES ARE UK MADE , CASE HARDENED AND GROUND TO THE VERY TOP TOLERANCE TO REDUCE PLAY TO A MINIMUM.  THIS SPINDLE IS .005" OVERSIZE ALLOWING THE SUSPENSION TO BE ASSEMBLED TO A BETTER THAN NEW CONDITION.  MACHINING OF THE ALLOY BLOCK MAY BE REQUIRED.

ALSO SEE B4/673, B4/672, 11181, B4671T, 674/677, 675/679 AND B4/671 FOR A STANDARD SIZE SPINDLE.

OVERALL LENGTH: 13"
DIAMETER: 0.869" (+/-.0005")(ie 5 THOU OVERSIZE)

IF YOU REQUIRE A STANDARD PLUNGER SPINDLE THEN SEE PART NUMBER B4/671 AND THE DIAMETER = 0.864" (+/-.0005")