'MANX' STAINLESS FRONT MUDGUARD Y BRACKETS, FLAT, UNPOLISHED ___(PR)

FOR MANY YEARS WE HAVE STAMPED OUT ALLOY Y BRACKETS ON A WONDERFUL AND ANCIENT MACHINE MADE BY THE SCOTTISH MACHINE TOOL CORP, JAMES BENNIE & SONS LTD, CLYDE ENGINE WORKS, GLASGOW, SW1.  MACHINE NUMBER 7249.  UNFORTUNATELY EITHER IT HAS DEVELOPED AN ELECTRICAL FAULT OR THE NEW ELECTRICAL SUPPLY IS TOO SENSITIVE AS EVERY TIME WE TRY TO SWITCH IT ON IT TRIPS THE SUPPLY.  IF/WHEN WE SORT THIS OUT WE WILL STAMP MORE OF THE ALLOY ONES BUT MEANWHILE WE HAVE DESIGNED THIS NICE STAINLESS STEEL 'SKELETON' BRACKET.  WE WILL BE SUPPLYING THIS IN FOUR VERSIONS.  THIS ONE, FLAT AND UNPOLISHED, ALLOWING THE USER TO SHAPE TO THE PROFILE OF HIS OR HER FRONT MUDGUARD (SKILL REQUIRED) AND THEN POLISH OR PAINT AS REQUIRED.  THERE WILL BE A POLISHED FLAT TYPE, ONE SHAPED TO SUIT THE SMALL FAIRLY LOW PROFILE ALLOY FRONT MUDGUARD, POLISHED AND A FOURTH VERSION SHAPED TO SUIT THE SLIGHTLY HIGHER PROFILE STAINLESS STEEL COMMANDO FRONT MUDGUARD.  ALL FOUR TYPES ARE INITIALLY IDENTICAL, IT IS ONLY THE SHAPING AND/OR POLISHING THAT MAKES THE DIFFERENCE.

THEY ARE SUPPLIED AS PAIRS AND COME COMPLETE WITH FOUR STAINLESS STEEL BUTTON HEADS WITH ASSOCIATED STAINLESS STEEL WASHERS AND FOUR 3MM THICK RUBBER WASHERS TO FIT BETWEEN THE BRACKET AND THE MUDGUARD.

OVERALL HEIGHT: 5 1/2" (140MM)
THE SLOTS ARE SPACED TO SUIT THE STANDARD NORTON STUD CENTRES 1 3/8" (35MM) AND ARE 9/32" (7MM) WIDE
MUDGUARD MOUNTING HOLES ARE 5 7/8" (150MM) BETWEEN CENTRES AND THE DISTANCE BETWEEN THE MUDGUARD MOUNTING HOLES AND THE SLOT (ie THE HEIGHT) IS MINIMUM 3 7/8" (98MM) AND MAXIMUM 5" (127MM)
MATERIAL IS 2MM THICK AND THIS VERSION IS SUPPLIED PLASTIC COATED ON ONE SIDE WHICH WHEN REMOVED REVEALS A BRUSHED FINISH.