KICKSTARTER NON FOLDING SMALL OFFSET. LONGER

DESIGNED TO BE APPROXIMATELY 3/4” LONGER THAN STANDARD TO IMPROVE SWING.

RGM EVOCATION OF THE ORIGINAL NORTON FIXED ARM KICKSTART, ITS DEVELOPMENT PROMPTED BY THE DUBIOUS QUALITY OF THOSE CURRENTLY ON THE MARKET THE ONES I HAVE SEEN SUFFERING FROM A COMBINATION OF POOR DESIGN, POOR FINISH, POOR FIT, RUBBISH MATERIAL etcetc..  OURS IS...

60 TON PER SQUARE INCH FORGING, HARDENED AND TEMPERED.  MADE FROM ALL NEW TOOLING.  SUBTLY LENGTHENED TO AID KICKING OVER.
CAREFULLY SCULPTURED TO PRODUCE A SMOOTH TRANSITION FROM TOP TO BOTTOM WITH NICELY RADIUSED ENDS TO PRODUCE A SHAPE THAT IS PLEASING TO THE EYE AND MATCHING THE ORIGINAL WHILST AT THE SAME TIME KEEPING WEIGHT TO A MINIMUM AS THESE EARLY NORTONS DID NOT ENJOY A PARTICULARLY STRONG RETURN SPRING.  LIGHTER THAN MOST, EVEN THE PEDAL PIN IS PARTIALLY HOLLOW  AND PRODUCED USING A SPECIAL TOUGH STEEL WITH AN ALUMINIUM END PLUG ALL DESIGNED TO MINIMISE WEIGHT.

SUPPLIED FULLY ASSEMBLED AND READY TO FIT, INCLUDING A STAINLESS CYCLE THREAD PINCH BOLT.

OFFSET (Distance between the back of the splined boss to the back at the pedal pin area): 3/4" (19MM)
LENGTH (Distance between centre of splined boss and centre of pedal pin): 8" (200MM)
ORIGINAL WOULD BE APPROXIMATELY 7"

ALSO SEE PART NUMBER A2/360.

WHEN DECIDING WHICH KICKSTART YOU REQUIRE AS THERE ARE MANY DIFFERENCES BETWEEN BIKES OVER THE YEARS INCLUDING LENGTH OF KICKSTART SHAFT, FOOTREST TYPE, GEARBOX TYPE etc.  THE BEST WAY IS TO LOOK AT THE BIKE IN QUESTION.  I WOULD ASSOCIATE 9703 WITH THE EARLIER DOLLS HEAD GEARBOX AND A2/360 WITH THE LATER BIKES.